SpeechControl

1. Philips Input Devices Driver Device
2. Philips Input Devices Driver Touchpad
3. Philips Input Devices Driver
4. Philips Input Devices Drivers
5. Philips Input Devices Driver Updater

Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error. If a USB device is generating the Code 10 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. Having an issue with your display, audio, or touchpad? Whether you're working on an Alienware, Inspiron, Latitude, or other Dell product, driver updates keep your device running at top performance. Step 1: Identify your product above. Step 2: Run the detect drivers scan to see available updates. Step 3: Choose which driver updates to install.

Statement drivers are the most advanced Xitanium drivers, fully programmable via the Philips MultiOne interface, configurable using the SimpleSet® feature via the Philips MultiOne interface and dimmable by means of DALI and TouchDim. All statement drivers have the complete package of features like hot wiring, reduced ripple current. To find the latest driver for your computer we recommend running our Free Driver Scan. Digital Audio (S/PDIF) (High Definition Audio Device) - Driver Download. Vendor.

Device and Application Control Software

• Freely configure your SpeechMike’s buttons and preinstalled modes
  for a personalized device
• Customize your foot control
  for more individualized and comfortable use
• Configure workflow applications
  for more convenient working
• Receive notifications when new firmware upgrades are available for your device
  for always being up to date

• Freely configure your SpeechMike’s buttons and preinstalled modes
  for a personalized device
• Customize your foot control
  for more individualized and comfortable use
• Configure workflow applications
  for more convenient working
• Receive notifications when new firmware upgrades are available for your device
  for always being up to date

Full control over your hardware devices

for a perfectly personalized solution

Philips SpeechControl Device and Application Control Software gives you full control over your hardware devices. The software allows you to customize the physical buttons of your SpeechMike dictation microphone, the pedals of your foot control, as well as the application actions within your workflow and speech recognition solution.

Features

Freely configure your SpeechMike’s buttons and preinstalled modes for a personalized device

Freely customize and assign different functions to each button and enable or disable certain features. You can make the F1 button create a new paragraph for example.

Configure your mouse functionality of your SpeechMike Premium touch pad or track ball for comfortable use

Configure your SpeechMike touch pad or trackball mouse to match your personal work preferences. You can increase or decrease the speed of your mouse cursor for example to fit your personal taste.

Customize your foot control for more individualized and comfortable use

Customize the pedals of your foot control to fit your individual way of working and increase comfort.

Configure workflow applications for more convenient working

Customize application commands, create hot keys or insert text to speed up your document creation process. You can for example insert a custom signature at the end of a letter with the click of a button.

Add and configure Dragon NaturallySpeaking speech recognition commands for even quicker transcription

Add and configure Dragon NaturallySpeaking speech recognition commands for even quicker transcription. You can make tthe fast forward button to a next field button for example.

Receive notifications when new firmware upgrades are available for your device for always being up to date

SpeechControl notifies you when new firmware updates are available for your device and allows you to download them automatically. This saves the user time and makes sure they are always up to date.

Central settings administration for quick and easy settings roll out

Administrators can configure and manage settings for multiple users centrally. This convenient feature saves time and resources.

Related products and accessories

Enter your VoiceTracer serial number

The VoiceTracer Speech Recognition Software only works with Philips VoiceTracer Audio Recorders. To download the installation file, enter the serial number of your VoiceTracer, then click Download.

Find your serial number

Each product has a unique serial number. A serial number usually starts with three letters followed by eleven numbers, e.g. DVT25100012345.

The serial number can be found on the rear side of the product or inside the battery compartment and in the Device Settings menu, under Information.

Downloading...

Philips Input Devices Driver Device

If your download does not begin, please click here to try again.

Software and drivers

• SpeechControl driver and configuration software

  4.3.431.29 - Windows

• SpeechControl driver and configuration software

  3.5.11 - macOS

• Application Control Profiles

  Microsoft Teams

• Application Control Profiles

  Zoom

Marketing & sales material

• Leaflet English (621 KB)

Frequently asked questions

Where to buy

Philips Input Devices Driver Touchpad

Find a local retailer

This article clarifies some confusion that vendors have experienced about how hardware that complies with PCI Power Management (PCI-PM) interacts with device drivers in the operating system and about how PCI-PM integrates with ACPI. For more information, see https://www.uefi.org/specifications

Device drivers and PCI power management

This discussion assumes that you are familiar with how Windows Driver Model (WDM) drivers handle power management events, as described in the current Windows DDK. In general, the responsibilities for device drivers are as follows:

• Bus drivers: Bus drivers are responsible for enumerating, configuring, and controlling devices. For PCI-PM, the PCI driver is responsible for reading the PCI-PM registers to determine the capabilities of the hardware. When POWER IRPs request power state changes, the PCI driver writes to the PCI power management registers to set the hardware to different Dx states.

  When a device is enabled for wake-up, the PCI driver writes to PCI-PM registers to enable the device to fire PME (ACPI will also take an action, see the next section). Finally, when ACPI determines that the PCI bus is waking the system, the PCI driver scans PCI configuration space looking for which device is asserting PME, disables PME in that device, and notifies the driver for that device.

• Device driver: The specific driver for the device is responsible for saving and restoring device context, and requesting power state changes as the policy owner for the device. When the device driver receives a POWER IRP requesting a lower device power state change, the device driver is responsible for saving any proprietary device context needed to later turn on the device. In some cases, there may be nothing to save.

PCI-PM registers are strictly the domain of the PCI driver--the IHV's device driver does not need to access any of these registers. Doing so would cause the system to not work reliably. The device driver's responsibility is to perform only proprietary actions.

Integrating ACPI and PCI PM

Some devices, particularly motherboard video devices in portables, may require both PCI Power Management as well as ACPI Source Language Assembler (ASL) to completely power manage the device. The PCI Power Management registers would control the internal state of a device, such as internal clocks and power planes. ASL would control the external state, such as external clocks and power planes, or in the case of video controllers, ASL would control the video backlights. Note that ASL and PCI-PM can only be combined on motherboard devices.

Philips Input Devices Driver

The OnNow architecture is a layered architecture, handling the integration of the device driver, PCI driver, and ACPI driver (and ASL) naturally. The following scenarios show the order in which drivers are called to handle these devices.

Note

For the above scenarios to work as described, a WDM driver must forward POWER IRPs correctly as described in the current version of the Microsoft Windows DDK.

Scenario 1: Turning off a device

1. Device driver: Saves proprietary device state.
2. PCI driver: Saves Plug and Play configuration, disables the device (interrupts and BARs), and puts the device in D3 using PCI-PM registers.
3. ACPI driver: Runs ASL code (_PS3 and _OFF for power resources no longer in use) to control the state external to the chip.

Scenario 2: PCI power management and device drivers

1. ACPI driver: Runs ASL code (_PS0 and _ON for any OnNow required power resources) to control the state external to the chip.
2. PCI driver: Puts the device in D0 using PCI-PM registers and restores Plug and Play configuration (interrupts and BARs--these might be different from what the device was previously on).
3. Device driver: Restores proprietary context in the device.

Philips Input Devices Drivers

Scenario 3: Enabling wake-up

1. Device driver: Sets proprietary registers in the chip to enable wake-up. For example, in pattern matching network wake-up, this is when the patterns would be programmed into the adapter.
2. PCI driver: Sets the wake-up enable bits in the PCI PM registers to allow the device to assert PME.
3. ACPI driver: Enables the GPE in the chip set associated with PME (as described by the _PRW object listed under the root PCI bus).

Scenario 4: Wake-up

Philips Input Devices Driver Updater

1. ACPI driver: Wakes and scans the GPE status bits for wake-up events, disabling GPEs for set GPE status bits, and running any _Lxx or _Exx methods associated with set GPE bits. In response to a wake-up notification on the PCI bus, the ACPI driver will complete the PCI driver's WAIT_WAKE IRP to notify the PCI driver that it is waking the system.
2. PCI driver: Scans configuration space looking for any devices with a set PME status bit. For each device, it disables PME and completes the WAIT_WAKE IRP for that device to inform the driver that it is asserting wake-up. The PCI driver stops scanning for wake devices when it has made a complete pass through all PCI devices having not found any asserting PME and when PME stops being asserted.
3. Device driver: Requests the device be put in D0 (see scenario 2) and sets any proprietary registers in the chip required to handle the wake-up event.

Call to action on PCI power management and device drivers

• Integrate ACPI and PCI-PM capabilities into your devices as described in this article.
• The PCI Power Management specification is available at https://www.pcisig.com. This link leaves the Microsoft.com site.
• ACPI Specification available at https://www.uefi.org/specifications. This link leaves the Microsoft.com site.
• The ACPI Component Architecture (ACPICA) compiler can be found at https://acpica.org/downloads/binary-tools.